Retaining Rings - Crescent

Retaining Rings -> Crescent

There are 66 products in the sub-categories of Retaining Rings - Crescent. Scroll down or follow the link to Retaining Rings - Crescent in the products table to see all these items combined into a handy table with filters.

Category Details

A selection of Crescent Retaining Rings. Variation of an E-Clip with an open face. Also known as a C-Clip.

  • Narrow section height provides good clearance capabilities.
  • Absence of teeth and deep set mean less thrust load ratings than e-clips.
  • For best results install using the recommended applicator tool.
Retaining Rings - Crescent

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Retaining Rings - Crescent category on the Small Parts & Bearings online store.
Groove Diameter (G) Shaft Diameter (S) Thickness (t) Clip OD in groove (C1) Clip OD Loose (D1) Groove Width (W) Indicative
Image
Crescent Retaining Rings - 2.3x3x0.4 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
2.30
mm
Shaft Diameter (S)
3.00
mm
Thickness (t)
0.4
mm
Clip OD in groove (C1)
4.10
mm
Clip OD Loose (D1)
3.96
mm
Groove Width (W)
0.44
Crescent Retaining Rings - 2.3x3x0.4 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Deleted Item. Available while stocks last.
Part Number: CC-023-030-C (Pack of 50)
10 units (500 pcs) Available Now | Further orders can be expected around Thu, Nov 26, 2026
$5.00 AUD
$5.00 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 10 available can be backordered.
Groove Diameter (G) Shaft Diameter (S) Thickness (t) Clip OD in groove (C1) Indicative
Image
Crescent Retaining Rings - 2.3x3x0.4 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
2.30
mm
Shaft Diameter (S)
3.00
mm
Thickness (t)
0.4
mm
Clip OD in groove (C1)
4.10
mm
Crescent Retaining Rings - 2.3x3x0.4 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 3.96 mm    Groove Width (W): 0.44   
Deleted Item. Available while stocks last.
Part Number: CC-023-030-C (Pack of 50)
10 units (500 pcs) Available Now | Further orders can be expected around Thu, Nov 26, 2026
$5.00 AUD
$5.00 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

10 units (500 pcs) Available Now. Backorder if more than 10.
Crescent Retaining Rings - 2.69x3.18x0.38 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
2.69
mm
Shaft Diameter (S)
3.18
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
4.57
mm
Clip OD Loose (D1)
4.19
mm
Groove Width (W)
0.46
Crescent Retaining Rings - 2.69x3.18x0.38 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17   
Additional stock available from USA subject to Prior Sale = 5504
Part Number: CC-027-032-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$36.23 AUD
$42.47 AUD $36.23 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 2.69x3.18x0.38 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
2.69
mm
Shaft Diameter (S)
3.18
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
4.57
mm
Crescent Retaining Rings - 2.69x3.18x0.38 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17    Clip OD Loose (D1): 4.19 mm    Groove Width (W): 0.46   
Additional stock available from USA subject to Prior Sale = 5504
Part Number: CC-027-032-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$36.23 AUD
$42.47 AUD $36.23 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 2.69x3.18x0.38 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
2.69
mm
Shaft Diameter (S)
3.18
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
4.57
mm
Clip OD Loose (D1)
4.19
mm
Groove Width (W)
0.46
Crescent Retaining Rings - 2.69x3.18x0.38 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Additional stock available from USA subject to Prior Sale = 55074
Part Number: CC-027-032-C (Pack of 50)
14 units (700 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$4.68 AUD
$7.73 AUD $4.68 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 14 available can be backordered.
Crescent Retaining Rings - 2.69x3.18x0.38 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
2.69
mm
Shaft Diameter (S)
3.18
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
4.57
mm
Crescent Retaining Rings - 2.69x3.18x0.38 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 4.19 mm    Groove Width (W): 0.46   
Additional stock available from USA subject to Prior Sale = 55074
Part Number: CC-027-032-C (Pack of 50)
14 units (700 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$4.68 AUD
$7.73 AUD $4.68 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

14 units (700 pcs) Available Now. Backorder if more than 14.
Crescent Retaining Rings - 3.2x4x0.4 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
3.20
mm
Shaft Diameter (S)
4.00
mm
Thickness (t)
0.4
mm
Clip OD in groove (C1)
5.200
mm
Clip OD Loose (D1)
5.000
mm
Groove Width (W)
0.44
Crescent Retaining Rings - 3.2x4x0.4 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Part Number: CC-032-040-C (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Sun, Sep 06, 2026
$27.23 AUD
$31.67 AUD $27.23 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 3.2x4x0.4 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
3.20
mm
Shaft Diameter (S)
4.00
mm
Thickness (t)
0.4
mm
Clip OD in groove (C1)
5.200
mm
Crescent Retaining Rings - 3.2x4x0.4 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 5.000 mm    Groove Width (W): 0.44   
Part Number: CC-032-040-C (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Sun, Sep 06, 2026
$27.23 AUD
$31.67 AUD $27.23 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 3.43x3.96x0.38 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
3.43
mm
Shaft Diameter (S)
3.96
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
5.59
mm
Clip OD Loose (D1)
5.21
mm
Groove Width (W)
0.46
Crescent Retaining Rings - 3.43x3.96x0.38 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17   
Additional stock available from USA subject to Prior Sale = 500
Part Number: CC-034-040-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$36.05 AUD
$42.25 AUD $36.05 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 3.43x3.96x0.38 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
3.43
mm
Shaft Diameter (S)
3.96
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
5.59
mm
Crescent Retaining Rings - 3.43x3.96x0.38 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17    Clip OD Loose (D1): 5.21 mm    Groove Width (W): 0.46   
Additional stock available from USA subject to Prior Sale = 500
Part Number: CC-034-040-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$36.05 AUD
$42.25 AUD $36.05 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 3.43x3.96x0.38 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
3.43
mm
Shaft Diameter (S)
3.96
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
5.59
mm
Clip OD Loose (D1)
5.21
mm
Groove Width (W)
0.46
Crescent Retaining Rings - 3.43x3.96x0.38 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Part Number: CC-034-040-C (Pack of 10)
49 units (490 pcs) Available Now | Further orders can be expected around Sat, Oct 17, 2026
$2.59 AUD
$3.90 AUD $2.59 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 49 available can be backordered.
Crescent Retaining Rings - 3.43x3.96x0.38 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
3.43
mm
Shaft Diameter (S)
3.96
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
5.59
mm
Crescent Retaining Rings - 3.43x3.96x0.38 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 5.21 mm    Groove Width (W): 0.46   
Part Number: CC-034-040-C (Pack of 10)
49 units (490 pcs) Available Now | Further orders can be expected around Sat, Oct 17, 2026
$2.59 AUD
$3.90 AUD $2.59 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

49 units (490 pcs) Available Now. Backorder if more than 49.
Crescent Retaining Rings - 4x5x0.6 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
4.00
mm
Shaft Diameter (S)
5.00
mm
Thickness (t)
0.6
mm
Clip OD in groove (C1)
6.40
mm
Clip OD Loose (D1)
6.20
mm
Groove Width (W)
0.64
Crescent Retaining Rings - 4x5x0.6 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Additional stock available from USA subject to Prior Sale = 8095
Part Number: CC-040-050-C (Pack of 10)
45 units (450 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$2.59 AUD
$3.75 AUD $2.59 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 45 available can be backordered.
Crescent Retaining Rings - 4x5x0.6 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
4.00
mm
Shaft Diameter (S)
5.00
mm
Thickness (t)
0.6
mm
Clip OD in groove (C1)
6.40
mm
Crescent Retaining Rings - 4x5x0.6 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 6.20 mm    Groove Width (W): 0.64   
Additional stock available from USA subject to Prior Sale = 8095
Part Number: CC-040-050-C (Pack of 10)
45 units (450 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$2.59 AUD
$3.75 AUD $2.59 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

45 units (450 pcs) Available Now. Backorder if more than 45.
Crescent Retaining Rings - 4.19x4.78x0.38 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
4.19
mm
Shaft Diameter (S)
4.78
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
6.35
mm
Clip OD Loose (D1)
6.20
mm
Groove Width (W)
0.46
Crescent Retaining Rings - 4.19x4.78x0.38 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Additional stock available from USA subject to Prior Sale = 21429
Part Number: CC-042-048-C (Pack of 10)
88 units (880 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$2.77 AUD
$4.08 AUD $2.77 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 88 available can be backordered.
Crescent Retaining Rings - 4.19x4.78x0.38 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
4.19
mm
Shaft Diameter (S)
4.78
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
6.35
mm
Crescent Retaining Rings - 4.19x4.78x0.38 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 6.20 mm    Groove Width (W): 0.46   
Additional stock available from USA subject to Prior Sale = 21429
Part Number: CC-042-048-C (Pack of 10)
88 units (880 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$2.77 AUD
$4.08 AUD $2.77 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

88 units (880 pcs) Available Now. Backorder if more than 88.
Crescent Retaining Rings - 4.19x4.78x0.38 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
4.19
mm
Shaft Diameter (S)
4.78
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
6.35
mm
Clip OD Loose (D1)
6.20
mm
Groove Width (W)
0.46
Crescent Retaining Rings - 4.19x4.78x0.38 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17   
Additional stock available from USA subject to Prior Sale = 7367
Part Number: CC-042-048-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$22.14 AUD
$25.96 AUD $22.14 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 4.19x4.78x0.38 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
4.19
mm
Shaft Diameter (S)
4.78
mm
Thickness (t)
0.38
mm
Clip OD in groove (C1)
6.35
mm
Crescent Retaining Rings - 4.19x4.78x0.38 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17    Clip OD Loose (D1): 6.20 mm    Groove Width (W): 0.46   
Additional stock available from USA subject to Prior Sale = 7367
Part Number: CC-042-048-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$22.14 AUD
$25.96 AUD $22.14 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 4.9x5.56x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
4.90
mm
Shaft Diameter (S)
5.56
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
7.37
mm
Clip OD Loose (D1)
6.99
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 4.9x5.56x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Additional stock available from USA subject to Prior Sale = 1200
Part Number: CC-049-056-C (Pack of 50)
1 pack (50 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$4.41 AUD
$7.22 AUD $4.41 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 1 available can be backordered.
Crescent Retaining Rings - 4.9x5.56x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
4.90
mm
Shaft Diameter (S)
5.56
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
7.37
mm
Crescent Retaining Rings - 4.9x5.56x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 6.99 mm    Groove Width (W): 0.74   
Additional stock available from USA subject to Prior Sale = 1200
Part Number: CC-049-056-C (Pack of 50)
1 pack (50 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$4.41 AUD
$7.22 AUD $4.41 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

1 pack (50 pcs) Available Now. Backorder if more than 1.
Crescent Retaining Rings - 5x6x0.7 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
5.00
mm
Shaft Diameter (S)
6.00
mm
Thickness (t)
0.7
mm
Clip OD in groove (C1)
7.60
mm
Clip OD Loose (D1)
7.40
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 5x6x0.7 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Additional stock available from USA subject to Prior Sale = 2300
Part Number: CC-050-060-C (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$10.95 AUD
$12.75 AUD $10.95 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 5x6x0.7 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
5.00
mm
Shaft Diameter (S)
6.00
mm
Thickness (t)
0.7
mm
Clip OD in groove (C1)
7.60
mm
Crescent Retaining Rings - 5x6x0.7 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 7.40 mm    Groove Width (W): 0.74   
Additional stock available from USA subject to Prior Sale = 2300
Part Number: CC-050-060-C (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$10.95 AUD
$12.75 AUD $10.95 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 5.28x5.99x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
5.28
mm
Shaft Diameter (S)
5.99
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
7.87
mm
Clip OD Loose (D1)
7.49
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 5.28x5.99x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Additional stock available from USA subject to Prior Sale = 7272
Part Number: CC-053-060-C (Pack of 10)
90 units (900 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$4.23 AUD
$4.23 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 90 available can be backordered.
Crescent Retaining Rings - 5.28x5.99x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
5.28
mm
Shaft Diameter (S)
5.99
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
7.87
mm
Crescent Retaining Rings - 5.28x5.99x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 7.49 mm    Groove Width (W): 0.74   
Additional stock available from USA subject to Prior Sale = 7272
Part Number: CC-053-060-C (Pack of 10)
90 units (900 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$4.23 AUD
$4.23 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

90 units (900 pcs) Available Now. Backorder if more than 90.
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
5.59
mm
Shaft Diameter (S)
6.35
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
8.38
mm
Clip OD Loose (D1)
7.90
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Additional stock available from USA subject to Prior Sale = 29753
Part Number: CC-056-064-C (Pack of 50)
3 units (150 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$5.23 AUD
$8.64 AUD $5.23 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 3 available can be backordered.
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
5.59
mm
Shaft Diameter (S)
6.35
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
8.38
mm
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 7.90 mm    Groove Width (W): 0.74   
Additional stock available from USA subject to Prior Sale = 29753
Part Number: CC-056-064-C (Pack of 50)
3 units (150 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$5.23 AUD
$8.64 AUD $5.23 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

3 units (150 pcs) Available Now. Backorder if more than 3.
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Carbon Spring Steel Zinc Plated
Groove Diameter (G)
5.59
mm
Shaft Diameter (S)
6.35
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
8.38
mm
Clip OD Loose (D1)
7.90
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Spring Steel Zinc Plated
Material: Carbon Spring Steel Zinc Plated   
Additional stock available from USA subject to Prior Sale = 10279
Part Number: CC-056-064-CZ (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$13.95 AUD
$16.15 AUD $13.95 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Carbon Spring Steel Zinc Plated
Groove Diameter (G)
5.59
mm
Shaft Diameter (S)
6.35
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
8.38
mm
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Spring Steel Zinc Plated
Material: Carbon Spring Steel Zinc Plated    Clip OD Loose (D1): 7.90 mm    Groove Width (W): 0.74   
Additional stock available from USA subject to Prior Sale = 10279
Part Number: CC-056-064-CZ (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$13.95 AUD
$16.15 AUD $13.95 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
5.59
mm
Shaft Diameter (S)
6.35
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
8.38
mm
Clip OD Loose (D1)
7.90
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17   
Additional stock available from USA subject to Prior Sale = 14969
Part Number: CC-056-064-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$42.05 AUD
$49.45 AUD $42.05 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
5.59
mm
Shaft Diameter (S)
6.35
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
8.38
mm
Crescent Retaining Rings - 5.59x6.35x0.64 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17    Clip OD Loose (D1): 7.90 mm    Groove Width (W): 0.74   
Additional stock available from USA subject to Prior Sale = 14969
Part Number: CC-056-064-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$42.05 AUD
$49.45 AUD $42.05 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 6x7x0.8 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
6.00
mm
Shaft Diameter (S)
7.00
mm
Thickness (t)
0.8
mm
Clip OD in groove (C1)
8.80
mm
Clip OD Loose (D1)
8.60
mm
Groove Width (W)
0.85
Crescent Retaining Rings - 6x7x0.8 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Additional stock available from USA subject to Prior Sale = 11139
Part Number: CC-060-070-C (Pack of 10)
38 units (380 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$3.95 AUD
$3.95 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 38 available can be backordered.
Crescent Retaining Rings - 6x7x0.8 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
6.00
mm
Shaft Diameter (S)
7.00
mm
Thickness (t)
0.8
mm
Clip OD in groove (C1)
8.80
mm
Crescent Retaining Rings - 6x7x0.8 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 8.60 mm    Groove Width (W): 0.85   
Additional stock available from USA subject to Prior Sale = 11139
Part Number: CC-060-070-C (Pack of 10)
38 units (380 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$3.95 AUD
$3.95 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

38 units (380 pcs) Available Now. Backorder if more than 38.
Crescent Retaining Rings - 6.27x7.14x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
6.27
mm
Shaft Diameter (S)
7.14
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
9.14
mm
Clip OD Loose (D1)
8.79
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 6.27x7.14x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Part Number: CC-063-071-C (Pack of 10)
86 units (860 pcs) Available Now | Further orders can be expected around Sat, Oct 17, 2026
$2.95 AUD
$4.47 AUD $2.95 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 86 available can be backordered.
Crescent Retaining Rings - 6.27x7.14x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
6.27
mm
Shaft Diameter (S)
7.14
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
9.14
mm
Crescent Retaining Rings - 6.27x7.14x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 8.79 mm    Groove Width (W): 0.74   
Part Number: CC-063-071-C (Pack of 10)
86 units (860 pcs) Available Now | Further orders can be expected around Sat, Oct 17, 2026
$2.95 AUD
$4.47 AUD $2.95 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

86 units (860 pcs) Available Now. Backorder if more than 86.
Crescent Retaining Rings - 6.27x7.14x0.64 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
6.27
mm
Shaft Diameter (S)
7.14
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
9.14
mm
Clip OD Loose (D1)
8.79
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 6.27x7.14x0.64 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17   
Additional stock available from USA subject to Prior Sale = 6000
Part Number: CC-063-071-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$43.50 AUD
$51.20 AUD $43.50 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 6.27x7.14x0.64 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
6.27
mm
Shaft Diameter (S)
7.14
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
9.14
mm
Crescent Retaining Rings - 6.27x7.14x0.64 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17    Clip OD Loose (D1): 8.79 mm    Groove Width (W): 0.74   
Additional stock available from USA subject to Prior Sale = 6000
Part Number: CC-063-071-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$43.50 AUD
$51.20 AUD $43.50 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
7.01
mm
Shaft Diameter (S)
7.93
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
9.91
mm
Clip OD Loose (D1)
9.55
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Additional stock available from USA subject to Prior Sale = 14000
Part Number: CC-070-079-C (Pack of 10)
90 units (900 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$4.32 AUD
$4.32 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 90 available can be backordered.
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
7.01
mm
Shaft Diameter (S)
7.93
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
9.91
mm
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 9.55 mm    Groove Width (W): 0.74   
Additional stock available from USA subject to Prior Sale = 14000
Part Number: CC-070-079-C (Pack of 10)
90 units (900 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$4.32 AUD
$4.32 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

90 units (900 pcs) Available Now. Backorder if more than 90.
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
7.01
mm
Shaft Diameter (S)
7.93
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
9.91
mm
Clip OD Loose (D1)
9.55
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17   
Part Number: CC-070-079-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Sep 01, 2026
$45.23 AUD
$53.27 AUD $45.23 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Stainless Steel Grade PH15-7-17 Ring
Groove Diameter (G)
7.01
mm
Shaft Diameter (S)
7.93
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
9.91
mm
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Stainless Steel Grade PH15-7-17
Material: Stainless Steel Grade PH15-7-17    Clip OD Loose (D1): 9.55 mm    Groove Width (W): 0.74   
Part Number: CC-070-079-SS (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Sep 01, 2026
$45.23 AUD
$53.27 AUD $45.23 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Carbon Spring Steel Zinc Plated
Groove Diameter (G)
7.01
mm
Shaft Diameter (S)
7.93
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
9.91
mm
Clip OD Loose (D1)
9.55
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Spring Steel Zinc Plated
Material: Carbon Spring Steel Zinc Plated   
Additional stock available from USA subject to Prior Sale = 492
Part Number: CC-070-079-CZ (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$14.68 AUD
$17.02 AUD $14.68 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Carbon Spring Steel Zinc Plated
Groove Diameter (G)
7.01
mm
Shaft Diameter (S)
7.93
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
9.91
mm
Crescent Retaining Rings - 7.01x7.93x0.64 mm - Spring Steel Zinc Plated
Material: Carbon Spring Steel Zinc Plated    Clip OD Loose (D1): 9.55 mm    Groove Width (W): 0.74   
Additional stock available from USA subject to Prior Sale = 492
Part Number: CC-070-079-CZ (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$14.68 AUD
$17.02 AUD $14.68 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 8x9x1 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
8.00
mm
Shaft Diameter (S)
9.00
mm
Thickness (t)
1
mm
Clip OD in groove (C1)
11.400
mm
Clip OD Loose (D1)
11.200
mm
Groove Width (W)
1.10
Crescent Retaining Rings - 8x9x1 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Additional stock available from USA subject to Prior Sale = 8311
Part Number: CC-080-090-C (Pack of 30)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$8.86 AUD
$10.24 AUD $8.86 AUD
Priced, Stocked and Sold Per 30 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 8x9x1 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
8.00
mm
Shaft Diameter (S)
9.00
mm
Thickness (t)
1
mm
Clip OD in groove (C1)
11.400
mm
Crescent Retaining Rings - 8x9x1 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 11.200 mm    Groove Width (W): 1.10   
Additional stock available from USA subject to Prior Sale = 8311
Part Number: CC-080-090-C (Pack of 30)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$8.86 AUD
$10.24 AUD $8.86 AUD
Priced, Stocked and Sold Per 30 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 8.51x9.53x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
8.51
mm
Shaft Diameter (S)
9.53
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
11.94
mm
Clip OD Loose (D1)
11.38
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 8.51x9.53x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish   
Additional stock available from USA subject to Prior Sale = 9179
Part Number: CC-085-095-C (Pack of 10)
147 units (1470 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$4.32 AUD
$4.32 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 147 available can be backordered.
Crescent Retaining Rings - 8.51x9.53x0.64 mm - Carbon Spring Steel Self Finish
Groove Diameter (G)
8.51
mm
Shaft Diameter (S)
9.53
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
11.94
mm
Crescent Retaining Rings - 8.51x9.53x0.64 mm - Carbon Spring Steel Self Finish
Material: Carbon Spring Steel Self Finish    Clip OD Loose (D1): 11.38 mm    Groove Width (W): 0.74   
Additional stock available from USA subject to Prior Sale = 9179
Part Number: CC-085-095-C (Pack of 10)
147 units (1470 pcs) Available Now | Further orders can be expected around Wed, Aug 26, 2026
$4.32 AUD
$4.32 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

147 units (1470 pcs) Available Now. Backorder if more than 147.
Crescent Retaining Rings - 8.51x9.53x0.64 mm - Carbon Spring Steel Zinc Plated
Groove Diameter (G)
8.51
mm
Shaft Diameter (S)
9.53
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
11.94
mm
Clip OD Loose (D1)
11.38
mm
Groove Width (W)
0.74
Crescent Retaining Rings - 8.51x9.53x0.64 mm - Spring Steel Zinc Plated
Material: Carbon Spring Steel Zinc Plated   
Additional stock available from USA subject to Prior Sale = 6491
Part Number: CC-085-095-CZ (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$16.23 AUD
$18.87 AUD $16.23 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Crescent Retaining Rings - 8.51x9.53x0.64 mm - Carbon Spring Steel Zinc Plated
Groove Diameter (G)
8.51
mm
Shaft Diameter (S)
9.53
mm
Thickness (t)
0.64
mm
Clip OD in groove (C1)
11.94
mm
Crescent Retaining Rings - 8.51x9.53x0.64 mm - Spring Steel Zinc Plated
Material: Carbon Spring Steel Zinc Plated    Clip OD Loose (D1): 11.38 mm    Groove Width (W): 0.74   
Additional stock available from USA subject to Prior Sale = 6491
Part Number: CC-085-095-CZ (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 26, 2026
$16.23 AUD
$18.87 AUD $16.23 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.