Hobby - Stepper Motors

Hobby -> Stepper Motors

There is only 1 product in the sub-categories of Hobby - Stepper Motors. Browse the Hobby - Stepper Motors products table.

Category Details

A selection of Stepper Motors Hobby. Small light weight stepper motor for your hobby or light duty projects

  • Products in this category are leftover from the days when we had a hobby supply shop.
  • All items are priced to quit.
  • If you would like to purchase the remaining stock of any category, we are open to all offers.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Hobby - Stepper Motors category on the Small Parts & Bearings online store.
Holding Torque Shaft Configuration Step Angle Voltage Phases Coil Resistance Indicative
Image
Stepper Motors Hobby - 600-1200 g.cm Flange Mount 3mm Hardened Steel Shaft - 64 Steps 5.625
Holding Torque
600-1200
g.cm
Shaft Configuration
Flange Mount 3mm Hardened Steel Shaft
Step Angle
64 Steps 5.625 °
Voltage
5
V DC
Phases
4
Coil Resistance
10
Ohm
Stepper Motors Hobby - 600-1200 g.cm Flange Mount 3mm Hardened Steel Shaft - 64 Steps 5.625
Frequency: 100 Hz    DC Resistance at 25 Deg C: 50 Ohm +/- 3.5   Diameter: 28 mm    Idle In Tranction Frequency: >600 Hz    Idle Out of Traction Frequency: >1000 Hz    In Traction Torque: >34.3 N.m   
Deleted Item. Available while stocks last.
Part Number: MSTP-600-028-64 (Each)
10 Available Now | Item Discontinued - Up to 10 may be ordered online. No backorders. Please contact us if you need a larger quantity
$10.00 AUD
$17.20 AUD $10.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

10 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Holding Torque Shaft Configuration Step Angle Voltage Indicative
Image
Stepper Motors Hobby - 600-1200 g.cm Flange Mount 3mm Hardened Steel Shaft - 64 Steps 5.625
Holding Torque
600-1200
g.cm
Shaft Configuration
Flange Mount 3mm Hardened Steel Shaft
Step Angle
64 Steps 5.625 °
Voltage
5
V DC
Stepper Motors Hobby - 600-1200 g.cm Flange Mount 3mm Hardened Steel Shaft - 64 Steps 5.625
Phases: 4    Coil Resistance: 10 Ohm    Frequency: 100 Hz    DC Resistance at 25 Deg C: 50 Ohm +/- 3.5   Diameter: 28 mm    Idle In Tranction Frequency: >600 Hz    Idle Out of Traction Frequency: >1000 Hz    In Traction Torque: >34.3 N.m   
Deleted Item. Available while stocks last.
Part Number: MSTP-600-028-64 (Each)
10 Available Now | Item Discontinued - Up to 10 may be ordered online. No backorders. Please contact us if you need a larger quantity
$10.00 AUD
$17.20 AUD $10.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

10 Available Now. These are priced to quit. Please contact us for a quote if you require more.